Tanks

Some tips and recommendations on setting up a new tank:

- Make sure to adjust the output on your device to match the recommended wattage stamped on the side of your coil. We recommend starting each brand new coil on the low end of the range stamped on your coil for the first 1-2 fills of the tank (this helps the coil break in more gently, and can get you an extra day or two of vaping out of your coil).

- If you are having difficulty removing the glass section to clean your tank, remove your coil and submerge your tank in hot water for about 10 minutes. This should loosen the seals from the glass and make it easier to remove.

- We recommend fully disassembling your tank every coil change or every other and fully cleaning it with warm water and dry thoroughly before reassembly. This can help maintain its best performance and flavor.

- See the bottom of this page for a video describing the process of replacing a shattered tank glass.

Nautilus 3.jpg

Aspire Nautilus 3

The tried and true Nautilus tank is back with a brand new rendition! Compatible with all of the Nautilus BVC coils of the past, the Nautilus 3 takes the best things about the Nautilus series tanks and adds a more convenient top-fill mechanism, as well as a 0.7 ohm  mesh coil designed for up to 25 watts of restricted lung hit. It also comes with one of the original 1.8 ohm coils for the classic mouth-to-lung draw with the same quality vapor and flavor production Nautilus fans have come to know and love! On top of all that, Aspire has reimagined the installation of these classic coils - no need to screw the coils into place - just insert into the tank and the juice wells will open to allow the coil to seat. Need to change your coil, but you JUST filled your tank? This new coil installation design allows for seamless coil changes even with a mostly full tank of liquid! - $27.99 +tax

Setup Demo Video Coming Soon!

gomaxwebimage.jpg
Innokin Go Max Tank

Disposable and inexpensive powerhouse for big clouds on a budget. Comfortable between 60 and 80 Watts this tank won't bother your batteries during extended vaping sessions and will provide some fantastic flavor thanks to the Plexus 3D Mesh coils that Innokin recently rolled out for nearly all of their tanks.

$4.00 + Tax this is a no brainer buy~

PNP Pod Tank

PNP Pod Tank.jpg
The PNP Pod tank is a resilient and versatile option for folks who want a tank that is less fragile. The metal base of the tank has a typical 510 style thread to screw on to any mod and adjustable airflow options. The 4.5ml capacity pod uses the plug-n-play style coils compatible with many other VooPoo devices. This tank comes with one 0.3 ohm coil rated for 32-40 watts and one 0.15 ohm coil rated for 60-80 watts. ~ $13.50 +tax
Z nano 2 tank.jpg

Z Nano 2 Tank

The Z Nano 2 tank has the same leak reseistant airflow located above the coil as the rest of the tanks in the Zeus/Z series. In addition to being compatible with the coils for Aegis Boost/Boost Plus/Hero pod systems, the Zeus Nano comes with one of the new 0.2 ohm coils rated for 50-58 watts. The tank can hold either 2ml or 3.5ml at a time, depending on which of the two included glass sections you are using. Refilling is easy with the notch lock mechanism top cap - simply give it a half turn to lock or unlock the top cap! - $27.99 +tax

geekvape-zeus-subohm-tank.jpg

Geekvape Zeus Sub-Ohm Tank

The Zeus Sub-Ohm Tank from Geekvape packs a punch in a stream-lined top-airflow design. With a quarter turn of the top cap, you can remove it to fill you tank, and be assured that when you close it back up it will be secure. Moving the airflow to the top makes this tank highly leak-resistant. And, unlike a lot of new tanks, you can change your coil mid-tankful without losing all your liquid because the the plug-n-play press fit coil design! - $28.99 + tax

Horizon Falcon II Tank

If you're a fan of the Falcon King tank, you'll definitely want to check out the Falcon II. With a robust slide-to-fill topcap design and the new Sector Mesh plug-n-play coils, Horizon has outdone themselves! The tank's capacity is 5ml with the preinstalled bubble glass, and comes with a spare straight glass as well as an extra sector mesh coil, and of course a set of spare seals. - $34.99 +tax

Falcon 2 tank.jpg

Setup Demo Video Coming Soon!

Replacing broken tank glass demo